The 1-1670918-1 connector housing meets both IPX4K and IPX9K industry ingress standards when fully assembled with the correct wire seals and mating components. The IPX9K rating certifies that the internal contact terminal junctions are thoroughly protected against close-range, high-pressure, and high-temperature water jet spray-downs.

The integrated purple component functions as a position confirmation clip. Once the 4-pin female receptacle housing is fully mated with its corresponding male plug, this slider mechanism can be pushed into place to provide positive locking assurance, ensuring the wire-to-wire connector system does not back out under severe vibration.

This housing is engineered exclusively for TE Connectivity MCON 1.2 series female receptacle crimp terminals with a 1.2mm tab width. Because this is a high-performance sealed automotive housing, engineers must install individual wire cavity seals (single wire seals) onto each cable before crimping to achieve the full IPX9K waterproof rating.

A: No, like most automotive housings, the MX44004SF1 receptacle is sold separately from the terminals. This allows you to select the appropriate wire gauge terminals for your specific application. Suzhou Suqin Electronic can provide the matching female socket contacts as a complete kit.

A: The MX44004SF1 is manufactured using glass-filled PBT, which is highly resistant to heat (up to 125°C) and automotive fluids. Coupled with its waterproof seal, it provides reliable signal integrity for sensors and actuators located in high-vibration and high-moisture areas.

A: We supply all components in their original JAE Electronics factory packaging (as shown in Img 6). Each shipment includes the original manufacturer’s labels with batch numbers and QR codes, ensuring full traceability for your quality management system.

A: You will need two AMP Superseal 1.5mm female terminals (e.g., 282403-1 for 0.5-1.5mm² wire) and two yellow wire seals (e.g., 281934-2). For a complete waterproof connection, ensure the terminal is fully seated and the secondary lock is clicked into place.

A: Yes, the Superseal 1.5mm series is specifically designed for automotive use and features excellent resistance to common fluids such as gasoline, diesel, engine oil, and anti-freeze.