Molex 0350220004 2.50mm Pitch 4POS Board-In Housing | Suqin

Descripción Corta:

  • Número de pieza y serie: Molex | Número de Pieza: 0350220004 (35022-0004) | Series: 35022

  • Tipo de Producto y Disposición del Circuito: Direct PCB Wire-to-Board (Board-In) Crimp Housing; single-row, 4-position (4POS) right-angle configuration

  • Pitch & Mounting Orientation: 2.50 mm (0.098″) pitch with right-angle through-hole board solder termination layout

  • Material & Operating Range: Natural Polyamide 6/6 (PA66 / Nylon 6/6) resin; operating temperature range from -40°C to +105°C

  • Packaging & Compatibility: Bulk bag packaging (2,000 EA/Bag); compatible with Molex 35021 series crimp terminals (sold separately); RoHS compliant


Detalle del producto

Etiquetas del producto

Molex 0350220004 (35022-0004) 35022 series 2.50mm pitch 4-position right-angle Board-In connector housing. Natural PA66 nylon material for direct PCB soldering wire harness assemblies. Available via Suzhou Suqin.

Resumen de datos

Parámetro TécnicoValor de Especificación
Número de pieza del fabricante0350220004 (35022-0004)
FabricanteMolex
Serie de productos35022 Series
Categoría del productoConnector Housings / Board-In Wire-to-Board
Tipo de ConectorBoard-In Housing
Número de posiciones4 Positions (4POS)
Paso – Interfaz de acoplamiento2.50 mm (0.098 pulg.)
Número de filas1
Orientación de MontajeRight Angle (R/A)
Tipo de montajeThrough Hole (Direct PCB Soldering)
Terminación de ContactoCrimpado (Contactos Vendidos por Separado)
Compatible TerminalsMolex 35021 Series Board-In Crimp Terminals
Material de AislamientoPolyamide 6/6 (PA66 / Nylon 6/6)
ColorNatural
Rango de temperatura de funcionamiento-40°C a +105°C
Embalaje estándarBulk Bag (2,000 EA/Bag)
País de OrigenSouth Korea
Cumplimiento RoHSCumple con las normativas

Detalles del producto

Direct Board-In Wire-to-PCB Soldering ArchitectureRight-Angle 2.50mm Low-Profile Form FactorIndustrial PA66 Nylon Insulation & Thermal Stability
Eliminates the requirement for a mating header by allowing crimped wire terminals to solder directly into the PCB, reducing total assembly cost and board space.Features a 2.50 mm pitch right-angle orientation, permitting horizontal cable egress and space-efficient routing on printed circuit boards.Molded from natural PA66 (Nylon 6/6) housing material, offering mechanical durability and electrical insulation across -40°C to +105°C operating conditions.

Nuestra ventaja

● Diversificación en el suministro de marcas,
Compra conveniente en un solo lugar

● Cubre una amplia gama de campos
Automoción, electromecánica, industrial, comunicación, etc.

● Información completa, entrega rápida
Reducir enlaces intermedios

● Buen servicio postventa
Respuesta rápida, respuesta profesional

● Garantía original auténtica
Soporte de consulta profesional

● Problemas postventa
Asegurar que los productos originales importados sean genuinos. Si hay un problema de calidad, se resolverá dentro de un mes de recibir la mercancía.

Q1: What is the primary function of a Board-In connector like Molex 0350220004?

A Board-In connector allows crimped harness wires to be inserted into the housing and soldered directly into printed circuit board (PCB) through-holes, eliminating the need for a mating PCB header and lowering overall system component costs.

Q2: Which crimp terminals are compatible with Molex 0350220004?

The 0350220004 housing is designed to accept Molex 35021 series board-in crimp terminals. The crimped terminals snap securely into the housing cavities and extend out the bottom for direct through-hole wave or manual soldering to the PCB.

Q3: What are the thermal and mounting characteristics of Molex 0350220004?

Molded from natural PA66 (Nylon 6/6), it features a 2.50 mm pitch right-angle orientation designed for space-saving horizontal cable exits along PCB edges, operating reliably within a temperature range of -40°C to +105°C.

Productos relacionados

Deja tu mensaje

Formulario de contacto de demostración (#3)