Molex 0350220004 2.50mm Pitch 4POS Board-In Housing | Suqin
Description courte :
-
Numéro de pièce & Série : Molex | Numéro de pièce : 0350220004 (35022-0004) | Series: 35022
-
Type de produit & disposition du circuit : Direct PCB Wire-to-Board (Board-In) Crimp Housing; single-row, 4-position (4POS) right-angle configuration
-
Pitch & Mounting Orientation: 2.50 mm (0.098″) pitch with right-angle through-hole board solder termination layout
-
Material & Operating Range: Natural Polyamide 6/6 (PA66 / Nylon 6/6) resin; operating temperature range from -40°C to +105°C
-
Packaging & Compatibility: Bulk bag packaging (2,000 EA/Bag); compatible with Molex 35021 series crimp terminals (sold separately); RoHS compliant
Détail du produit
Étiquettes du produit
Molex 0350220004 (35022-0004) 35022 series 2.50mm pitch 4-position right-angle Board-In connector housing. Natural PA66 nylon material for direct PCB soldering wire harness assemblies. Available via Suzhou Suqin.
Aperçu des données
| Paramètre Technique | Valeur de la Spécification |
| Numéro de pièce du fabricant | 0350220004 (35022-0004) |
| Fabricant | Molex |
| Série de produits | 35022 Series |
| Catégorie de produit | Connector Housings / Board-In Wire-to-Board |
| Type de connecteur | Board-In Housing |
| Nombre de positions | 4 Positions (4POS) |
| Pas – Interface de raccordement | 2,50 mm (0,098 po) |
| Nombre de rangées | 1 |
| Orientation de montage | Right Angle (R/A) |
| Type de montage | Through Hole (Direct PCB Soldering) |
| Terminaison de contact | Crimp (Contacts vendus séparément) |
| Compatible Terminals | Molex 35021 Series Board-In Crimp Terminals |
| Matériau d'isolation | Polyamide 6/6 (PA66 / Nylon 6/6) |
| Couleur | Naturel |
| Plage de température de fonctionnement | -40°C à +105°C |
| Emballage Standard | Bulk Bag (2,000 EA/Bag) |
| Pays d'origine | South Korea |
| Conformité RoHS | Conforme |
Détails du produit
| Direct Board-In Wire-to-PCB Soldering Architecture | Right-Angle 2.50mm Low-Profile Form Factor | Industrial PA66 Nylon Insulation & Thermal Stability |
| Eliminates the requirement for a mating header by allowing crimped wire terminals to solder directly into the PCB, reducing total assembly cost and board space. | Features a 2.50 mm pitch right-angle orientation, permitting horizontal cable egress and space-efficient routing on printed circuit boards. | Molded from natural PA66 (Nylon 6/6) housing material, offering mechanical durability and electrical insulation across -40°C to +105°C operating conditions. |
Notre avantage
● Diversification de l'approvisionnement par marque,
Achats pratiques en un seul endroit
● Couvre un large éventail de domaines
Automobile, électromécanique, industriel, communication, etc.
● Informations complètes, livraison rapide
Réduction des intermédiaires
● Bon service après-vente
Réponse rapide, réponse professionnelle
● Garantie d'authenticité d'origine
Support de consultation professionnelle
● Problèmes après-vente
Assurez-vous que les produits originaux importés sont authentiques. En cas de problème de qualité, il sera résolu dans un délai d'un mois après réception des marchandises.
Q1: What is the primary function of a Board-In connector like Molex 0350220004?
A Board-In connector allows crimped harness wires to be inserted into the housing and soldered directly into printed circuit board (PCB) through-holes, eliminating the need for a mating PCB header and lowering overall system component costs.
Q2: Which crimp terminals are compatible with Molex 0350220004?
The 0350220004 housing is designed to accept Molex 35021 series board-in crimp terminals. The crimped terminals snap securely into the housing cavities and extend out the bottom for direct through-hole wave or manual soldering to the PCB.
Q3: What are the thermal and mounting characteristics of Molex 0350220004?
Molded from natural PA66 (Nylon 6/6), it features a 2.50 mm pitch right-angle orientation designed for space-saving horizontal cable exits along PCB edges, operating reliably within a temperature range of -40°C to +105°C.












