News Aug-20-2026 19

Amphenol HVC Series Technical Selection Guide: Pinouts, CAD Drawings, and Mating Counterparts for EV Applications

In high-voltage powertrain and auxiliary architecture design, selecting the precise connector part number (PN) is critical to preventing insulation breakdown, electromagnetic interference (EMI), and mating mismatches. The Amphenol HVC (High Voltage Connector) Series is widely deployed across Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) subsystems, including On-Board Chargers (OBC), Power Distribution Units (PDU), PTC heaters, and electric air compressors.

Amphenol HVC series high-voltage connector part number breakdown diagram

When engineers and procurement teams search for specific model numbers, verifying raw technical parameters—such as wire gauge compatibility, continuous current limits, and exact mating interfaces—is the fastest way to accelerate prototyping and secure production lines.

1. Decoding the Amphenol HVC Part Numbering Structure

The Amphenol HVC numbering system conveys critical structural and electrical parameters directly through its nomenclature. Understanding this code ensures exact alignment between the harness design and the header interface.

Part Number Nomenclature Breakdown (Example: HVC2P28FS102)

  • [HVC] – Series Identifier (High Voltage Connector)
  • [2] – Number of Positions / Cores (e.g., 2-Pin)
  • [P] – Connector Type (P = Plug / Receptacle Housing)
  • [28] – Terminal System Frame Size (28 = 2.8mm system; 63 = 6.3mm system)
  • [FS] – Keying / Coding Code & Key Way Configuration (e.g., FS = Keying Code)
  • [102] – Internal Revision & Harness Accommodation Code

For instance, the Amphenol HVC2P28FS102 Product Page designates a 2-position, 2.8mm frame size high-voltage receptacle engineered specifically for auxiliary applications requiring up to 900V DC and 40A continuous current.

2. Technical Parameter Verification & Pinout Specifications

High-voltage applications require strict adherence to safety standards. According to IEC 60529 Ingress Protection Standards, high-voltage vehicle connectors must maintain structural seal integrity under extreme thermal cycling and fluid exposure.

Technical ParameterAmphenol HVC2P28 Frame (e.g., HVC2P28FS102)Amphenol HVC2P63 Frame (e.g., HVC2P63FS106)
Rated Voltage900 V DC1000 V DC
Current Rating (Max)40 A Continuous63 A Continuous
Wire Cross-Section2.5 mm² – 5.0 mm²10.0 mm² – 16.0 mm²
Terminal System2.8 mm Pin/Socket6.3 mm Pin/Socket
EMC Shielding360° Metal Shield (>60 dB attenuation)360° Metal Shield (>60 dB attenuation)
Ingress ProtectionIP67 / IP68 (Mated)IP67 / IP68 / IP69K (Mated)
Flammability RatingUL 94V-0 Rated PBT-GF30UL 94V-0 Rated PBT-GF30

Safety Compliance Note: All housing materials comply with the UL 94 Standard for Flammability Testing, ensuring self-extinguishing safety in high-thermal load conditions.

3. Mating Counterparts and Header Interface Matching

A common failure point in wire harness sourcing is selecting a plug without matching the corresponding board-mount or panel-mount header counterpart. High-voltage connectors use physical keying (Coding A, B, C, D) to prevent mis-mating during high-density harness installation.

  • Plug / Harness Side: Receptacle assembly with female socket contacts and high-voltage interlock loop (HVIL) pins.
  • Header / Device Side: Flanged straight or right-angle male header welded or bolted directly to the OBC or PDU chassis.

If you are replacing or mating an existing HVC2P63FS106 High-Voltage Plug, ensure the corresponding board-side header shares identical coding (“FS” keying) and terminal pin plating to avoid contact degradation or mechanical jamming.

Professional studio shot of HVC2PG36FS110 high voltage 2-pin EV connector plug with gray housing for electric vehicles.

4. How to Request Technical Datasheets, 2D/3D CAD Drawings, and Stock Availability

When finalizing PCB layouts or designing custom cable assembly harnesses, access to official 3D STEP files and 2D engineering drawings is indispensable.

Suzhou Suqin Electronic Technology Co., Ltd. provides complete technical support, factory datasheets, and 3D CAD models for the entire Amphenol HVC inventory.

To request files or inquire about immediate warehouse availability:

  1. Identify your required Part Number (e.g., HVC2P28FS102 or HVC2P63FS106).
  2. Submit your exact inquiry on our Suqin Contact & Quote Request Page.
  3. Receive verified engineering drawings and lead-time confirmation from our technical sales team within 24 hours.