Products

  • TE 282090-1 6-Pin AMP Superseal 1.5mm Female Housing | Suqin

    TE 282090-1 6-Pin AMP Superseal 1.5mm Female Housing | Suqin

    • Genuine AMP Superseal 1.5mm Series: Rugged 6-position waterproof automotive housing engineered for female receptacle contacts with original factory part number 282090-1.

    • IP67 Environmental Protection: Pre-equipped with a high-grade yellow silicone rubber perimeter seal ensuring dust-tight and watertight performance under harsh road conditions.

    • Heavy-Duty PA66 GF Matrix: Molded from robust glass-fiber reinforced polyamide 66 to deliver outstanding mechanical impact strength and thermal durability up to 125°C.

    • Power Circuit Optimization: Engineered with a wide 6mm centerline pitch supporting a high contact current capacity up to 14A for 12V, 24V, or 48V automotive electrical architectures.

    • B2B Procurement Support: Distributed by Suzhou Suqin for commercial wire-to-board, wire-to-device, and wire-to-wire harness systems, with rapid sampling available for design verification.

  • KUM Equivalent HK261-02010 2-Pin Automotive Male Housing | Suqin

    KUM Equivalent HK261-02010 2-Pin Automotive Male Housing | Suqin

    • KUM Automotive Series Equivalent: High-reliability 2-position automotive male housing cross-referenced with part numbers HK261-02010, NIC02M-W, and 35296344.

    • Compact 060 Terminal Interface: Tailored for 060 series (approx. 1.5mm) male tab terminals to deliver secure low-voltage signal and power connection channels.

    • Integrated Mechanical Latch: Engineered with a rigid top detent locking lever to provide clear tactile feedback and absolute mating retention against heavy engine vibration.

    • Premium White Polyamide Matrix: Molded from automotive-grade industrial Nylon ensuring high insulation resistance, thermal stability, and long-term anti-aging performance.

    • B2B Standard Package Supply: Distributed by Suzhou Suqin in original factory-sealed bags (200 units/bag) assembled in South Korea, with fast sampling available for harness testing.

  • TE 1-353908-0 10-Pin AMP Mini CT Receptacle Housing 1.5mm | Suqin

    TE 1-353908-0 10-Pin AMP Mini CT Receptacle Housing 1.5mm | Suqin

    • Genuine AMP Mini CT Series: Premium 10-position wire-to-board receptacle housing with original TE Connectivity part number 1-353908-0.

    • Compact 1.5mm Centerline Pitch: High-density single-row configuration engineered to maximize space efficiency on PCBs and inside compact terminal layouts.

    • Detent Mating Retention: Built with a precise mechanical detent lock structure to ensure secure mating integrity and prevent accidental pull-out under minor cable strain.

    • UL 94V-0 Nylon 66 Shroud: Molded from reliable flame-retardant white Nylon 66 material, supporting a stable working temperature environment from -30°C up to 105°C.

    • B2B Supply & Sampling: Sourced and distributed by Suzhou Suqin for commercial signal and power harness assemblies, with sample support available for engineering evaluations.

  • TE 2-1718645-1 4-Pin MCON 1.2mm Female Housing Code B | Suqin

    TE 2-1718645-1 4-Pin MCON 1.2mm Female Housing Code B | Suqin

    • Genuine TE Connectivity MCON Series: Premium 4-pin sealed automotive female housing with original factory part number 2-1718645-1, engineered for high-performance MCON 1.2mm terminal systems.

    • Keying Code B Interface: Features a precision-molded mechanical keying configuration and integrated accent color sub-assembly to guarantee error-proof mating alignment.

    • Heavy-Duty Environmental Protection: Rated at strict IPX4K and IPX9K waterproof standards, utilizing an advanced sealing design to withstand high-pressure steam jet cleaning.

    • Robust PA66 GF30 Matrix: Molded from 30% glass-fiber reinforced polyamide to ensure exceptional structural rigidity and stable performance across an extended temperature range of -40°C to 130°C.

    • B2B Supply & Sampling: Distributed by Suzhou Suqin in standard industrial packages optimized for wire-to-board and wire-to-device power applications, with sample support available for harness design verification.

  • Sumitomo 6189-0372 4-Pin Waterproof Female Connector Gray | Suqin

    Sumitomo 6189-0372 4-Pin Waterproof Female Connector Gray | Suqin

    • Genuine Sumitomo Series: Premium 4-pin waterproof automotive female connector housing with original factory part number 6189-0372.

    • Factory Designated Design: Officially designated under factory part name 11292W9A04F-GR, precision-molded in industrial Dark Gray.

    • Advanced Ingress Protection: Equipped with an internal high-performance silicone rubber seal to safeguard critical electrical contacts against fluid and humidity.

    • Integrated Terminal Positioning: Features a pre-installed white front-loaded retainer lock to ensure secure pin seating and prevent unexpected back-out.

    • B2B Supply & Sampling: Distributed by Suzhou Suqin in genuine industrial lot packaging of 100 pieces per bag, with sample support available for technical verification.

  • Rosenberger E6Z027-001-C H-MTD High-Speed Housing Coding C Light Blue | Suqin

    Rosenberger E6Z027-001-C H-MTD High-Speed Housing Coding C Light Blue | Suqin

    • Core Identity: Rosenberger H-MTD series high-speed automotive plastic data connector housing with part number E6Z027-001-C.

    • Keying Layout: Physical Coding C error-proofing configuration molded in industrial Light Blue similar to RAL 5012.

    • Dual Locking: Multi-stage safety pairing a pre-assembled traffic purple secondary lock with a bright red CPA slider.

    • Target Application: Tailored for distinctive vehicle sub-networks, automotive gateway modules, telematics, and high-frequency differential signals.

    • Supply Package: Distributed by Suzhou Suqin in standard industrial wholesale lot boxes of 500 pieces.

  • Rosenberger E6Z027-001-B H-MTD High-Speed Housing Coding B Pure White | Suqin

    Rosenberger E6Z027-001-B H-MTD High-Speed Housing Coding B Pure White | Suqin

      • Genuine Rosenberger H-MTD Series: Premium automotive plastic data connector housing with original factory part number E6Z027-001-B.

      • Coding B Mechanical Interface: Features a precise physical error-proofing configuration molded in standardized Pure White (similar to RAL 9010).

      • Integrated Dual-Locking Safety: Pairs a factory pre-assembled traffic purple secondary lock with a high-visibility red CPA slider for maximum vibration resistance.

      • High-Speed Automotive Applications: Optimized for distinctive vehicle sub-networks, high-frequency differential signals, gateway modules, and telematics systems.

      • B2B Supply & Packaging: Distributed by Suzhou Suqin in standard industrial wholesale packaging of 500 pieces per box, with sample support available for verification.

  • Rosenberger E6Z027-001-A H-MTD High-Speed Housing Coding A Jet Black | Suqin

    Rosenberger E6Z027-001-A H-MTD High-Speed Housing Coding A Jet Black | Suqin

    • Core Identity: Rosenberger H-MTD series high-speed automotive plastic data connector housing with part number E6Z027-001-A.

    • Keying Layout: Physical Coding A error-proofing configuration molded in industrial Jet Black similar to RAL 9005.

    • Dual Locking: Multi-stage safety pairing a pre-assembled traffic purple secondary lock with a bright red CPA slider.

    • Target Application: Optimized for multi-port automotive Ethernet, ADAS radar/camera links, and high-frequency coaxial routing.

    • Supply Package: Distributed by Suzhou Suqin in standard industrial wholesale lot boxes of 500 pieces.

  • Rosenberger AMZ14D-C02-Z HFM High-Speed FAKRA Mini Waterblue Coding Z | Suqin

    Rosenberger AMZ14D-C02-Z HFM High-Speed FAKRA Mini Waterblue Coding Z | Suqin

    • Manufacturer and Series Identification: Rosenberger HFM (High-Speed FAKRA Mini) automotive RF component series, part number AMZ14D-C02-Z.

    • Mechanical Coding Profile: Type Z universal/neutral keying configuration, allowing standardized cross-mating capabilities across multiple sub-codes.

    • Color and Visual Coding: Molded in waterblue plastic, matching the official automotive industry designation similar to RAL 5021.

    • Material Matrix Composition: Constructed from PBT-I-GF30 glass-fiber reinforced polymer, integrated with a high-grade silicone cable seal.

    • Ingress Environmental Ratings: Certified to IPX7 fluid immersion standards and IPX9K high-pressure thermal washdown specifications.

    • Mechanical Force Thresholds: Delivers a minimum latch retention force of 110 N and an anti-override coding efficiency of 150 N or greater.

    • Thermal Tolerance Envelopes: Operates reliably across a stable thermal spectrum ranging from -40 to +105 degrees Celsius.

    • Packaging and Supply Specs: Distributed by Suzhou Suqin in standardized commercial bulk lot cartons containing 250 pieces per box.

Leave Your Message

Contact Form Demo (#3)