Products

  • DEUTSCH DT Series DT06-12SA 12-Pin Gray Receptacle Housing | Suqin

    DEUTSCH DT Series DT06-12SA 12-Pin Gray Receptacle Housing | Suqin

    • Series & Manufacturer: Manufactured by TE Connectivity under the DEUTSCH DT product family, carrying the part number DT06-12SA.

    • Configuration & Layout: Designed as a 12-position, dual-row rectangular housing configured for female size 16 socket contacts.

    • Environmental Sealing: Rated to IP68 and IP6K9K ingress protection standards, featuring an integrated orange radial seal and a red-orange rear wire seal to prevent moisture and dust ingress.

    • Material Composition: Injection-molded from 15% glass-fiber reinforced Polyamide (PA66-GF15) in standard industrial gray, built to operate within a temperature range of -55°C to 125°C.

    • Mating & Retention Security: Features Keying Code A alignment to prevent mismatching and integrates housing latches compatible with secondary Terminal Position Assurance (Wedge Lock W12S, sold separately).

  • KET 090 II Series MG651026 2-Position Receptacle Housing | Suqin

    KET 090 II Series MG651026 2-Position Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by KET (Korea Electric Terminal) under the 090 II product series with part number MG651026.

    • Configuration & Layout: Features a 2-position single-row layout configuration with a 4.00 mm center pitch and a mating tab width of 0.090 inches.

    • Locking & Assurance: Equipped with a housing lance primary locking mechanism and an integrated Terminal Position Assurance (TPA) system to prevent terminal back-out under vibration.

    • Material Composition: Injection-molded from unsealed, natural-colored Polybutylene Terephthalate (PBT) thermopolymer material.

    • Mating Compatibility: Directly mates with KET male housing MG641029 and accepts female socket contacts ST730675-3, ST730676-3, and ST730677-3.

  • Molex Micro-Fit 3.0 0436450600 6-Position Receptacle Housing | Suqin

    Molex Micro-Fit 3.0 0436450600 6-Position Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by Molex under the Micro-Fit 3.0 product family, belonging to the 043645 base product series with part number 0436450600.

    • Configuration & Layout: Features a 6-position single-row in-line configuration with a 3.00 mm (0.118 in) centerline pitch.

    • Locking Mechanism: Equipped with an integrated external passive latch lock mechanism to secure mechanical retention and prevent accidental unmating under physical stress.

    • Material Composition: Injection-molded from black thermoplastic polyester material, offering an operational temperature rating of -40°C to 105°C.

    • Mounting & Termination: Designed for free-hanging (in-line) cable wire harness assemblies, utilizing crimp termination methods for female socket contacts.

     

  • Molex MicroClasp 0513534000 40-Position Receptacle Housing | Suqin

    Molex MicroClasp 0513534000 40-Position Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by Molex under the MicroClasp product family, belonging to the 051353 base product series with part number 0513534000.

    • Configuration & Layout: Features a high-density 40-position dual-row matrix layout with a 2.00 mm (0.079 in) centerline pitch and 5.00 mm (0.197 in) row-to-row spacing.

    • Locking Mechanism: Equipped with an integrated centralized external latch lock mechanism to secure structural retention against inadvertent demating under vibration.

    • Material Composition: Injection-molded from unsealed white Polyamide (PA66, Nylon 6/6) thermopolymer material offering a continuous operational temperature rating of -40°C to 105°C.

    • Mounting & Termination: Designed for free-hanging (in-line) cable wire harness assemblies, utilizing crimp termination methods for female socket contacts.

  • Molex Mini-Fit Jr. 0039012066 6-Position Panel Mount Plug Housing | Suqin

    Molex Mini-Fit Jr. 0039012066 6-Position Panel Mount Plug Housing | Suqin

    • Manufacturer & Series: Manufactured by Molex under the Mini-Fit Jr. product family, belonging to the 5559 series with base part number 003901.

    • Configuration & Layout: Designed as a 6-position dual-row (2 x 3 matrix) rectangular connector housing with a 4.20 mm (0.165 in) pitch and row spacing.

    • Mounting & Integration: Engineered for panel mounting applications featuring integrated snap-in ears for toolless, secure chassis installation.

    • Material & Flammability: Constructed from high-integrity Polyamide (PA66, Nylon 6/6) insulation polymer in an ivory color finish.

    • Mating & Security: Utilizes a positive locking ramp mechanism for secure connection with compatible mating receptacle housings.

  • Molex stAK50h 1600290013 27-Position Hybrid Receptacle Housing | Suqin

    Molex stAK50h 1600290013 27-Position Hybrid Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by Molex within the stAK50h product family, designated under the 160029 base series with part number 1600290013.

    • Configuration & Layout: Features a hybrid rectangular 27-position matrix layout, partitioned into 19 dedicated signal channels and 8 dedicated power channels.

    • Mechanical Locking & Verification: Equipped with an integrated primary latch lock mechanism paired with a secondary Connector Position Assurance (CPA) component.

    • Material Composition: Injection-molded from glass-filled Syndiotactic Polystyrene (SPS) insulation polymer, finished in a blue housing color specification.

    • Mounting & Termination: Optimized for free-hanging (in-line) cable mounting configurations utilizing crimp contact termination methods for female sockets.

  • Molex Mini-Fit Jr. 39-01-2145 14-Position Receptacle Housing | Suqin

    Molex Mini-Fit Jr. 39-01-2145 14-Position Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by Molex under the Mini-Fit Jr. product family, designated with part number 39-01-2145 within the 5557 series.

    • Configuration & Layout: Features a 14-position dual-row matrix layout with a 4.2 mm (0.165 in) centerline pitch and 4.2 mm (0.165 in) row-to-row spacing.

    • Electrical Capacity: Engineered to support power and signal applications with a maximum current rating of up to 13 A per circuit.

    • Material & Flammability: Molded from natural-colored nylon material achieving an industrial UL 94V-0 flammability rating for enhanced fire retardation.

    • Mechanical Mounting & Integrity: Designed for free-hanging (cable mount) configuration utilizing crimp termination methods for secure female socket contact retention.

  • TE Connectivity VAL-U-LOK 1-794954-0 10-Position Receptacle Housing | Suqin

    TE Connectivity VAL-U-LOK 1-794954-0 10-Position Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by TE Connectivity under the VAL-U-LOK product family, designated with part number 1-794954-0 as a receptacle housing product type.

    • Configuration & Layout: Features a 10-position dual-row matrix configuration with a 4.2 mm (0.165 in) centerline pitch and matching row-to-row spacing.

    • Electrical Ratings: Engineered to support an operating voltage up to 600 VAC for concurrent power and signal circuit applications.

    • Material & Flammability: Molded from natural-colored nylon thermopolymer material achieving an industrial UL 94V-2 flammability rating.

    • Mechanical Mounting & Range: Designed for free-hanging (cable mount) termination utilizing crimp methods, compatible with insulation diameters ranging from 1.2 mm to 3.1 mm (0.047 in to 0.122 in).

  • TE Connectivity 794954-2 2-Position VAL-U-LOK Receptacle Housing | Suqin

    TE Connectivity 794954-2 2-Position VAL-U-LOK Receptacle Housing | Suqin

    • Manufacturer & Series: Manufactured by TE Connectivity under the VAL-U-LOK product family, designated with part number 794954-2 as a receptacle housing.

    • Configuration & Layout: Features a 2-position dual-row (2 x 1 grid) inline configuration with a 4.2 mm (0.165 in) centerline pitch and row-to-row spacing.

    • Electrical Ratings: Engineered to support an operating voltage up to 600 VAC for concurrent power and signal circuit applications.

    • Material & Flammability: Molded from natural-colored nylon thermopolymer resin achieving a standard UL 94V-2 flammability rating.

    • Mechanical Mounting & Range: Designed for free-hanging (cable mount) termination utilizing crimp methods, compatible with insulation diameters ranging from 1.2 mm to 3.1 mm (0.047 in to 0.122 in).

Leave Your Message

Contact Form Demo (#3)